How to configure a 4G camera

  123   Network Cameras

【1】Product Model(Version)

Camera Model: HFW4230M-4G-AS-I2
Version: the screenshot as follow

【2】Description of the problem

Dahlia 4G network camera can use 4G SIM card to realize video surveillance and SMS alarm function. It is very advantageous in areas that cannot be covered by network cable. The following describes how to configure this camera.

【3】Problem Processing (Root Cause)


4-1 Precondition

  • Dahua 4G network(HFW4230M-4G-AS-I2)
  • 4G SIM card
  • a mobile phone

4-2 Step by Step Instructions
1.In the case of power failure, insert the SIM card into the camera, pay attention to the side of the SIM card with the chip facing the camera tail

2.After the SIM card is installed, the device is powered on and logs in to the Web. We need to enter the local operator’s APN information in the following interface.

Note:The corresponding operator’s ANP information can be searched in Google. Official projects can be obtained from local operators

3.Fill in the phone information as shown below

4. Enable event, open SMS reminder enable (exercise motion detection, Other event configuration methods are similar)

After triggering motion detection, the phone will receive the SMS reminder

5.Open P2P, you can see live video on gDMSS