How to operate the PTZ for radar before smart tracking calibration

  185   PTZ Cameras

【1】Product Model(Version)

SD6AE230F-HNI 

【2】Description of the problem

This file is for preparation of PTZ to do radar smart tracking before calibration

【3】Problem Processing (Root Cause)

【4】Solution

4-1 Precondition

4-2 Step by Step Instructions
(1) Before calibration,you need judge whether PTZ installation is suitable for linkage monitoring of Radar&PTZ.
1、 Use PTZ IP address to login in via Web.
2、 Click setting→Camera→Video→Overlay→OSD info then see cofiguration. 
3、 Enable Coordinates and Zoom.
4、 Then you can see parameters of PTZ at top left corner in preview.


(2) Follow up those operations in calibration interface to check whether SD is installed vertically.
1、 Click Dropdown button of ‘PTZ function’ at bottom right corner in Live View. Then choose ‘Go To’.  
2、 Set Horizontal Angle (0~3600) to 0, Vertical Angle (-200~900) to 0, Zoom (1~128) to 1. 
3、 After ensuring there is no shelter right in front of camera, increase Zoom parameter up to maximum manually. At this point, PTZ is installed correctly whether preview interface does not appear to the ground nor appear to sky directly.  
4、 If preview appears to the ground directly, please adjust mounting bracket upwardly till ensuring PTZ video picture could detect horizontally.
5、 If preview appears to the sky directly, please adjust mounting bracket downwardly till ensuring PTZ video picture could detect horizontally.

(3) Adjust radar sensitivities.
1、 Use Radar IP address to login in via Web.
2、 Both user name and password are ‘root’.
3、 You can choose language (CN/EN) of operation interface at top right corner in Home page.
4、 Click Algorithm, then you can see Algorithm parameters configuration.
5、 Modify General Sensitivity number, default number is 5. The smaller number means lower sensitivities and weaker detection ability. Similarly, the bigger number means higher sensitivities and stronger detection ability.
  

LEAVE A COMMENT