How to install HDMI Netra card in NVR616-4KS2 Series

  120   Network Recorders

【1】Product Model(Version)

NVR616-4KS2
      Baseline
 

【2】Description of the problem

This file is to guide you how to extend 4CH HDMI extended Netra Card..
 

【3】Problem Processing (Root Cause)

【4】Solution

4-1Precondition
Ø 1ch*VGA; 2ch*HDMI(Defualt)
2ch HDMI has two different resources
HDMI1-the same image as VGA
HDMI2-the different image compared with VGA&HDMI1
Capacity: HDMI1+HDMI2 total can support 16ch H.265/H.264H 1080P@25fps
Ø 4ch HDMI(Optional)
4ch HDMI has 4 different sources compared with all the other video output ports
HDMI3– the different image compared with all other video output ports
HDMI4– the different image compared with all other video output ports
HDMI5– the different image compared with all other video output ports
HDMI6– the different image compared with all other video output ports
Capacity:
HDMI3+HDMI4 total can support 8ch H.264H 1080P@25fps;
HDMI5+HDMI6 total can support 8ch H.264H 1080P@25fps;
Each HDMI maximum support 16 win-split. In 4win-split, it will show main-stream; 9/16win-split, it will show sub-stream; each channel maximum support H.264H 1080P@25fps

4-2 Step by Step Instructions
(1) PCIe Connection between mainboard and HDMI Module

(2) HDMI Module screwed to rear panel

(3) You can only operate the HDMI Ports in NVR’s Local Menu and only operate those HDMIs in HDMI1 or VGA
(4) Enable “Navigation Bar” in NVR
Main menu->Setting->System->General

(5)Operate in Navigation Bar in preview

(6) Choose the right screen
Click  to choose the right screen. In default, it only has Screen-1&Screen-2(Corresponding to HDMI1&HDMI2), if you have HDMI Module, it will automatically have Screen-3, Screen-4, Screen-5, Screen6(Corresponding to HDMI3,4,5,6)
(7) Choose the win-split and channel to display

LEAVE A COMMENT