How to Config Smart Track (Fisheye+Dome) on SmartPSS

  128   SmartPSS

Introduction to the text

How to Config Smart Track (Fisheye + Dome) on SmartPSS

Description

This article will show you how to config Smart Track (Fisheye + Dome) on SmartPSS

Prerequisites

  • SmartPSS

Step by Step Instructions

Smart track (fisheye+dome) sets fisheye camera as master camera with panorama view, and sets speed dome as slave camera.

1. Calibration Requirement

  • To improve calibration success rage and accuracy, please follow:
  • Calibrate at least 3 groups, max 10 groups. 4 groups is recommend.
  • Start from far to close by clockwise or counterclockwise direction. Point of calibration shall be even.
  • Calibrate position with obvious traits, such as cross of object corner.

2. Calibration Camera

Step 1

On device tree select fisheye device, right click select Smart Track Config.

Step 2

Associate speed dome

In Link Speed Dome area, click next to fisheye name.

In speed dome dropdown list, select speed dome.

Click Save.

Step 3

Add calibration point.

(1)Click Add, you will see a cross sign and a new record generated.

(2)Drag fisheye cross sign to appropriate position.

Note:

  • To improve calibration accuracy, please use far object as reference for first group. Other calibrations points can be clockwise or counterclockwise distributed.
  • Calibrate position with obvious traits, such as cross of object corner.

(3)In speed dome image, adjust speed dome position to make center of speed dome match the cross sign of fisheye.

IconNameNote
ZoomZoom in/out speed dome
FocusAdjust speed dome focus
IrisAdjust speed dome brightness
E-mouseElectronic mouse
Quick PositionClick this icon, drag mouse in monitoring video, select area, then video is automatically adjusted by making pane as center

Click to save calibration info.

Repeat step 1~4 to complete remaining calibration position. N

Click OK.

Click OK to save config.

Fisheye and speed dome are calibrated successfully if there is no feedback info; It will generate tips “Calibration failed, please calibrate again” if calibration failed.

3. Achieving Smart Track (Fisheye and Dome)

After you complete calibration, you can view link effect in smart track interface.

Step 1

On device tree, select fisheye device, right click Smart Track.

  • By default link mode is enabled, click and you can switch between fisheye correction mode and link mode. To enable fisheye correction, you can select installation method and view mode in fisheye preview window.
  • On the left you can set PTZ,

Step 2

Execute the following operation to see link effect.

  • Link

Click any position in fisheye channel, speed dome will rotate to corresponding position and auto adjust zoom

  • Box link

Select box in fisheye video, speed dome rotates to corresponding area.

  • Drag link

Drag position calibration in fisheye video, speed dome rotates with the calibration.

2 thoughts on - How to Config Smart Track (Fisheye+Dome) on SmartPSS

LEAVE A COMMENT