How to Event Configuration for access control on SamrtPSS

  129   SmartPSS

Introduction to the text

How to set event configuration for access control on SamrtPSS

Description

This article will show you How to set event configuration for access control on SamrtPSS

Prerequisites

  • SmartPSS
  • ASC1204B-S

Step by Step Instructions

Access controller must be added into SmartPSS client. You can click ‘Configuration / Devices’ to add it on the SmartPSS home page.

In Access interface, you can click Event Configuration. You can set that when a input point inside access system triggers a specific event, client will have video link (live preview/record), link event includes: alarm, abnormal, normal event, link event pop up plus display in log.

Step 1

Click .

Step 2

Select device channel.

Step 3

Select alarm event. Refer to the following chart for more details.

Step 4
Configure alarm linkage.

       1- Link Notice

        After set link notice, when event occurs, it will alarm or alarm flash on map.

   (1)In New tab, click Event CFG.
     (2)Click device and select event type.

   (3)Slide to turn on event, click Notify tab.

   (4)Click Notify tab

(5) According to need, slide to enable alarm sound or map flash.

(6)Click Save. Click Copy to, you can link config of this camera to other device.

   2- Link Video

  After you link video, when corresponding event occurs, it will link corresponding camera preview or record.

(1)In New tab, click Event CFG.

(2)Click device and select event type.

(3)Slide to enable event and click Link Video tab.

(4)Select video window, and double click camera you want to link, directly drag it into window.

Note:

On , you can set display mode.

(5)In camera list to be linked, set camera preset, link record or preview stream type, whether auto open video and enable record when event occurs, linked record or preview duration.

Note:

Click , you can delete camera.

(6)Click Save. Click Copy to, you can copy camera link config to other devices.

Step 5

Click Save to complete config.

LEAVE A COMMENT