How to modify device info on SmartPSS

  149   SmartPSS

Introduction to the text

How to modify device info on SmartPSS

Description

This article will show you how to modify device on SmartPSS

Prerequisites

  • SmartPSS
  • IPC, NVR

Step by Step Instructions

Add device info (username, password, IP/domain) which is wrong or shall be updated, you can change info here.

Modify Device Info

Step 1

In Device interface, click next to device you want to modify, or double click device.

Step 2

Change device info, refer to blew Chart

ItemFunction
Device namePlease input a device name here.
Method to addBy IP/domain and SN.
IP/Domain nameDevice IP address or domain name. Note: You can add device of IPV6 address.
SNDevice SN. Note: For P2P device only.
PortDevice IP port. It is 37777 by default.
Group NameYou can choose one group.
User nameThe user name you login the device.
PasswordThe password you login the device.

Step 3

Click Save.

Modify IP Address

Step 1

In Devices interface, click Auto Search.

Step 2

Set device segment and click Search.

Step 3

Check device you want to modify IP, click Modify IP. System pops up modify device IP box.

Step 4

Enter device IP info. Click OK.

  • When you check a single device, system pops u p Modify IP box,
  • When select more than one device, system pops up Batch Modify IP box.

Step 5

Set device new IP start IP, subnet mask and gateway.

Step 6

Click Save.

LEAVE A COMMENT