How to set Face Detection on SmartPSS

  323   SmartPSS

Introduction to the text

How to set Face Detection on SmartPSS


This article will show you how to set Face Detection on SamrtPSS


  • SmartPSS

Step by Step Instructions

Face detection supports detecting pedestrians in the specific area and capture clear face picture; besides, facial features can be clearly captured and recognized, including gender, age, expression and wearing glasses or not.

   1.   Enabling Face Detection

Step 1

Click Next after setting preset on the Scene interface.

Step 2

Select scene according to your needs.

Step 3

Click and select smart plan of face detection.

The smart plan is selected when the white frame appears next to the icon. If you select other smart plans (mutually exclusive with face detection), first it needs to click corresponding icon to cancel selection, then click to select smart plan of face detection.

   2. Configuring Face Detection Rules

Step 1

Click Enable to enable face detection.

Step 2

Modify Rule Name.

Step 3

Configure arm time and alarm linkage.

Click Config and the interface of Config is displayed.

Click Arming Schedule, select week and period according to actual requirement, input start time and end time.


The factory default arm time is 24 hours every day.

Click Alarm, set alarm linkage mode.

For more parameter details, check the follow Chart

Click Save.

Step 4

Draw target filter box.

Filter box is used to filter bigger or smaller targets, it will trigger alarm when the target size is within the range.

Click Enable.

Select filter mode.

Filter mode includes following two types:

  • Width or height, the target is kept if either height or width meets condition.
  • Width and height, the target is kept if both width and height meet condition.

Click Draw and you can draw filter box in the video window.

Select filter box, drag four corners to enlarge or shrink filter box to suitable size.


Select filter box, click Clear and draw again.

Step 5

Click Save.