How to set Inter-door lock on SmartPSS

  131   SmartPSS

Introduction to the text

How to set Inter-door lock on SmartPSS

Description

This article will show you How to set Inter-door lock on SmartPSS

Prerequisites

  • SmartPSS
  • ASC1204B-S

Step by Step Instructions

Access controller must be added into SmartPSS client. You can click ‘Configuration / Devices’ to add it on the SmartPSS home page.

In Permission Management interface, click Inter-door Lock, to set inter-lock between two doors on one access controller. When one door is unlocked, other doors will be locked. If you want to unlock one door (under normal status), all of the others shall be locked, otherwise you cannot unlock this door.

Step 1

Click , select Inter-door Lock.

Step 2

Click Add. The system displays the interface of Multi-door Lock.

Step 3

Select multi-door lock and set parameters. For details, see the following chart。

Step 4

Click OK. The system will automatically issue data and inter-door lock setting is completed. Inter-door lock config is enabled by default after it is set.

LEAVE A COMMENT