How to set preset, tour, pattern and scan of PTZ

  237   Network Recorders

In the Cloud Console interface, click the Expand menu to set the Cloud Console function.

Note:The functional options in the diagram are mainly based on the protocol. When some functions are not supported, the icon is grayed out and cannot be selected.

After clicking the icon to enter the corresponding configuration interface, right-click to return to the Cloud Settings main interface.

Set preset point

Step 1

      Click , In the PTZ settings interface, click the preset point tab.

Step 2

      Control the camera to the desired position through the direction button.

Step 3

      Enter the preset point value in the preset point text box.

Step 4

      Click settings.

Enter the preset point number and click Delete preset point to delete the preset point.

Step 5

       After setting, click the icon, input the preset point value, and the camera will go to the corresponding preset point position.

Set Tour

Step 1

       Click  to enter the PTZ settings interface and click the cruise group tab.

Step 2

      Enter the cruise route value in the cruise text box.

Step 3

      Enter the preset point value in the preset point text box and click Add preset point to add a preset point to the cruise route. Add multiple preset points by multiple operations.

Delete preset point

Enter the preset point number and cruise number, and click Delete preset point to delete the preset point in the cruise route.

Note: Part of the preset access point protocol does not support deletion.

Delete cruise group

Enter the cruise number and click Delete cruise group to delete the cruise group.

Step 4

After setting, click the  icon and enter the cruise group value to start the cruise group. The camera will cruise between the preset points.

Click again to stop.

Set Pattern

Step 1

       Click  to enter the PTZ settings interface, and then click the track patrol tab.

Step 2

       Enter a value in the tour text box.

Step 3

       Turn the camera to the starting position through the direction button and click start.

Step 4

       Return to the PTZ setting main interface to perform a series of operations such as zoom, focus, aperture or direction.

Step 5

       Click “end” in the interface.

Step 6

      Enter the value of trace inspection and click  to quickly start the trace inspection. The percentage progress is displayed in the lower left corner of the interface.

Click again to stop.

Set Scan

Step 1

       Click  to enter the PTZ settings interface, and click the line scan boundary tab.

Step 2

       Select the left boundary of the camera line scan through the direction button, and click “left boundary”.

Step 3

       Select the right boundary of the camera line scan through the direction button, and click “right boundary”.

Step 4

       After setting, click to quickly start line sweeping boundary.

       Click again to stop.

LEAVE A COMMENT