Category : Network Cameras

Generally ,we suggest our customer download the tool box ,then install the relevant software on tool box .However,some customer just need the software or intallation package. You can find the relevant files of your computer ,then zip this file and send this zip file to customer. Customer just need to unzip the file ,and run ..

Read more

Prerequisites VLC media player IP camera for test, IP.1.1.65; Account RTSP port open Encode mode must be H.264 instead of H.265   Step by Step Instruction Download and install VLC software, you can download it in VLC homepage, please find the link below: http://www.videolan.org/ 2.Open the VLC and click “Media”–>”Open Network Stream” 3.Enter the command “rtsp://10.1.1.65:554/live” ..

Read more

When an alarm is triggered at the alarm-in port, the system performs alarm linkage. Step 1 Select Setting > Event > Alarm Settings > Alarm. Step 2 Select the Enable check box to enable the alarm linkage function. Step 3 Select a relay-in port and a sensor type. ● Sensor Type: NO or NC. ● ..

Read more

You can restart the system manually, and set the time of auto reboot and auto deleting old files. This function is disabled by default. Step 1 Select Setting > System > Auto Maintain Step 2  Configure auto maintain parameters. ● Select the Auto Reboot check box, and set the reboot time, the system automatically restarts as the ..

Read more

Access Abnormality includes No SD Card, Capacity Warning, SD Card Error, Disconnection, IP Conflict and Unauthorized Access. Note: Only device with SD card function has these three statues: No SD card, capacity warning, and SD card error. Device without SD card function does not support. Step1:Select Setting>Event>Abnormality>SD Card Step2:Choose the event type, and enable it ..

Read more

When there is a network abnormality, which including the network disconnection and IPD conflict, and the system will start the alarm linkage. Step1:Select Setting>Event>Abnormality>Network Step2:Choose the event type, and enable it to start the network abnormality detection function. Step3:Set the alarm linkage Step4:Click ..

Read more

When the time of the login fail exceeds the configured max time by inputting incorrect password, system will execute the alarm linkage. Step1: Select Setting>Event>Abnormality>illegal access Step2: Click enable to start the illegal access detection function. Step3: Set the time of Login error from 3 to 10. Once the time of incorrect password exceeds the set login error number, ..

Read more